Installation:

Give your fence a new and distinctive look with Stallion Low Voltage Lighting System.

This post lighting system is listed by CSA and UL Standards 1838. This insures that all of the components work safely together. Our new Colonial Low Voltage lights are available for 3-1/2", 4" and 5" PVC posts. Applications are unlimited only by your imagination.

Send us your picture. If we use your picture in our gallery we will send you a $25.00 gift certificate to Applebee's Restaurant

Fixture Assembly Instructions

1. Un-snap Colonial low voltage post cap from lens.
2. Attach socket/reflector assembly model (22CL1000) to lens with screws provided.
3. Attach fixture to Stallion's C.S.A. Certified 12-2 cable with low voltage cable connetors for the low voltage lighted post cap. Place one connector on each side of cable and press together to lock. Prongs will piece cable to make contact and light fixtures.
4. Insert excess wire into top of fence posts.
5. Glue lens with reflector assembly onto fence post.
6. Snap Colonial Cap onto top of lense.

Note: The wiring is to be protected by routing through fence posts and rails to the low voltage lighted post cap fixture(s). The wiring shall not be buried except for a max of 6 inches (15.2 cm) deep, in order to connect transformer to fist post. The low voltage lighted post cap fixture(s) shall not be installed within 10 ft. (1.52 m) of pool, spa or foundation. Low Voltage fixtures have 7W 918 lamp and and electrical rating of 12 Vac, 7W input, 60 Hz.